1 12
You’re only $499 away from free shipping!
Gard'nClean Liquid
Gard'nClean Liquid
$49.95
Gard'nClean Fast Release
Gard'nClean Fast ...
$39.95
Gard'nClean Extended Release
Gard'nClean Exten...
$39.95

Gard'nClean Fast Release Bulk Boxes

Gard'nClean Fast Release Bulk Boxes

Water-activated chlorine dioxide generator for deep penetrating air quality improvement

Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Always read product labels before use.
$3,595.00
$3,595.00
Sale Sold out
Size

For commercial/reseller discounts, click here. Existing account holders, please log in.

Key Features

  • Complete Environmental Deodorization
  • Fast-acting 3-dimensional gas treatment
  • No expensive equipment needed
  • Just add water to activate 
  • Minimum treatment time is 2 hour treatment time without intervention
  • Easily disposed of sachet in trash, landfill-safe
  • Discard excess liquid down any drain
  • Fast Release is not a disinfectant/pesticide. It is not registered with the EPA and has no “kill” claims regarding disinfection, sanitization, etc.

    ***Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR.

Directions for use

  1. Turn off lights and close blinds as Chlorine Dioxide (CIO2) is photoreactive.
  2. If treating individual rooms, seal off room to prevent the gas from exiting the room.
  3. If possible, use Gard’nClean GC liquid at 100 ppm to spray down all surfaces in the room before using Gard’nClean Fast Release. (The evaporation of the Gard’nClean Clean Liquid acts as an additional fumigant, resulting in an entourage effect.)
  4. Place the Gard’nClean Fast Release in the center of the room, as high up as possible. The ClO2 gas will disperse throughout the entire room. ClO2 is heavier than air, so do not place under tables or any obstructions. We recommend using fans to help keep the ClO2 dispersed evenly throughout the space. If treating all areas on a shared HVAC system, you can place the Fast Release by the return and allow the HVAC system to disperse the gas into the environment.
  5. Remove foil pouch from the jar, remove Gard’nClean Fast Release sachet from the foil pouch without tearing the sachet inside.
  6. Place Gard’nClean Fast Release sachet in the provided jar and fill with approx. 175 ml of water (to the fill line).
  7. Leave the room immediately and stay out room for a minimum of 4 hours.
  8. Ventilate the room for at least one hour before returning without PPE.
  9. Upon re-entry dispose of remaining liquid in the container down any drain and discard sachet into any trash receptacle. *Although Gard’nClean Fast Release can be used on its own, we recommend that all surfaces should be thoroughly cleaned and disinfected with Gard’nClean GC Liquid before performing a Fast Release Gas Treatment.

*For full instructions, see our Directions for Use on the label, or consult the Gard’nClean Institutional SOP.

Product Specifications

  Feature   Specification
  Dimensions (LxWxH)   8.25” x 5” x 2”
  Weight for 1K   2.09 oz
  Reactants   Sodium Chlorite : 36.6%
  Other Ingredients : 63.4%
  Product Generates   Pure Chlorine Dioxide Gas
  Feature   Specification
  Dimensions (LxWxH)   8.25” x 5” x 2”
  Weight for 2.5K   3.05 oz
  Reactants   Sodium Chlorite (36.6%) , other ingredients (63.4)Activated
  Activated Ingredient   Pure Chlorine Dioxide Gas
  Feature   Specification
  Dimensions (LxWxH)   8.25” x 5” x 2”
  Weight for 4K   3.11 oz
  Reactants   Sodium Chlorite (36.6%) , other ingredients (63.4)Activated
  Activated Ingredient   Pure Chlorine Dioxide Gas
  Feature   Specification
  Dimensions (LxWxH)   8.25” x 5” x 2”
  Weight for 10K   3.2 oz
  Reactants   Sodium Chlorite (36.6%) , other ingredients (63.4)Activated
  Activated Ingredient   Pure Chlorine Dioxide Gas

PPE Requirments

PROPER PPE: (REQUIRED DURING GENERATION PROCESS AND IF USING A POWERED APPLICATION DEVICE)

  • Eye Protection
  • NIOSH/MHSA approved Respirator appropriate for Chlorine Dioxide
  • Gloves
Gard’nClean Fast Release SDS
View full details

Gard'nClean Fast Release Bulk Boxes

    GC-1K (up to 1,000 cu ft) Price :

    GC-2.5K (up to 2,500 cu ft) Price :

    GC-4K (up to 4,000 cu ft) Price :

    GC-10K (up to 10,000 cu ft) Price :

Improve air quality and deodorize any space

Gard’nClean Fast Release

The Gard’nClean Chlorine Dioxide (ClO2) Fast Release is a true dry gas fumigation for deeply deodorizing any space or environment . This includes hard to reach areas such as microscopic openings on non-sealed materials, HVAC ducting, electrical components, and much more. Due to the very small size of the chlorine dioxide molecule, it can easily penetrate into all of these spaces to eradicate the source of VOCS (Volatile organic compounds), odors, and other compounds from deep within. Great to use in transportation, bathrooms, kitchens, offices, common areas and dwellings.

Although Gard’nClean Fast Release can be used on its own, we recommend that all surfaces should be thoroughly cleaned and disinfected with Gard’nClean GC Liquid before performing a Fast Release Gas Treatment.

UltraPure

Gentle on infrastructure

No residual

Safe for Equipment

Non-Corrosive

Made in USA

How to Use Fast Release

  • Open the packaging and place the fast release sachet in the cup

  • Add water (150ml)

  • Turn off lights and leave room to allow fumigation.

  • Install Re-Entry Door sign (VIEW PDF)

Fast Release FAQ’s:

What is Gard’nClean Fast Release?

Gard'nClean Fast Release is a water-activated chlorine dioxide generator for deep penetrating air quality improvement.

How does Gard’nClean Fast Release work? 

Gard’nClean Fast Release is based around a proprietary sachet. By adding 150mL of water to the cup, the water vapor enters through the sachet, mixes with the reactants, and quickly releases pure chlorine dioxide gas. Gard’nClean Fast Release improves air quality by quickly releasing its contents over a 4-12 hours without requiring any power source or expensive equipment.

Is Gard’nClean Fast Release safe for use around plants and people?

No,Gard’nClean Fast Release is not safe for use around plants or people. We recommend using Gard’nClean Fast Release in an empty room and placing a do not enter sign on the door when treatment is in progress. (VIEW PDF)

What PPE do I need with Gard’nClean Fast Release?

PROPER PPE:Eye ProtectionNIOSH/MSHA-approved respirator appropriate for chlorine dioxideGloves

How do I know what size Gard’nClean Fast Release to use?

To determine the appropriate size of Gard’nClean Fast Release for your space, calculate the cubic footage (length x width x height) of the area you wish to treat. Match this calculation with the product size recommendations to ensure effective air quality improvement.

How do I activate the Gard’nClean Fast Release?

To activate Gard’nClean Fast Release, place the correctly sized product in the desired location. Open the sachet and put it in the cup. Add water. Turn off the lights and remove yourself from the room. Place a sign on the door and allow 4-12 hours for fumigation to take place.

How long does a Gard’nClean Fast Release last?

If you can evacuate the air out of the room, you can perform a treatment in as little as 4 hours. Gard’nClean Fast Release is most effective if activated for the total 12 hours. 

Never run out of Gard’nClean products again!

  • Choose your products

    Configure size and quantities

  • Schedule delivery

    Pick when you want your shipments

  • Pause and cancel anytime

    Easily adjust products and schedule.